()

zxc(1)

  NAME
zxc, unzxc - Compress or decompress .zxc files

  SYNOPSIS
zxc [OPTIONS] [INPUT-FILE] [OUTPUT-FILE]

unzxc is equivalent to zxc -d.

  DESCRIPTION
zxc is a command-line interface for the ZXC compression library, a high-performance lossless compression algorithm optimized for maximum decompression throughput.

zxc is designed for the “Write Once, Read Many” paradigm. It trades compression speed to generate a bitstream specifically structured to maximize decompression speed, effectively offloading complexity from the decoder to the encoder. It aims to provide very high decompression speeds across modern architectures while maintaining competitive compression ratios. ZXC is particularly suited for scenarios such as Game Assets, Firmware or App Bundles where data is compressed once on a build server and decompressed millions of times on user devices.

By default, zxc compresses a single INPUT-FILE. If no OUTPUT-FILE is provided, zxc will automatically append the .zxc extension to the input filename. If no INPUT-FILE is provided, zxc will read from standard input (stdin) and write to standard output (stdout).

  STANDARD MODES

-z, –compress
    Compress FILE. This is the default mode if no mode is specified.

-d, –decompress
    Decompress FILE. This is the default mode when zxc is invoked under the name unzxc (typically an installed symlink). An explicit mode flag still takes precedence.

-l, –list
    List archive information, including compressed size, uncompressed size, compression ratio, checksum method, and dictionary ID (if any). Also accepts a .zxd dictionary file, in which case it prints the dictionary’s dict_id.

–train
    Train a dictionary from the input FILEs given as training samples. The output path is set with -o (see –output); when -o is omitted, the dictionary is written to dictionary_<dict_id>.zxd in the current directory. See DICTIONARIES.

-t, –test
    Test the integrity of a compressed FILE. It decodes the file and verifies its checksum (if present) without writing any output.

-b, –bench [N]
    Benchmark in-memory performance. Loads the input file entirely into RAM and measures raw algorithm throughput (default duration is 5 seconds).

  OPTIONS

-m, –multiple
    Process multiple files at once. When specified, all subsequent non-option arguments are treated as input files. For each input file, a corresponding .zxc file is created (or decompressed into its original name). Output cannot be written to standard output (stdout) when this mode is enabled.

-r, –recursive
    Recursively process directories. When specified, any directory listed as an argument will be traversed, and all regular files within it will be processed (compressed or decompressed). This option implicitly enables --multiple mode.

-1..-7
    Set the compression level from 1 (fastest compression) to 7 (maximum density).

•   -1, -2 (Fast): Optimized for real-time assets or when compression speed is a priority.

•   -3 (Default): Balanced middle-ground offering efficient compression and superior ratio to fast codecs.

•   -4, -5 (Compact): Better ratio than LZ4 with faster decoding than Zstd. Suited for embedded systems and firmware.

•   -6 (Max): Beats LZ4-HC on both axes — better ratio and faster decode — while staying in the multi-GB/s decode class. Best for archival and write-once / read-many workloads where compression time is amortized over many reads.

•   -7 (Ultra): Maximum density. A deep optimal parse plus Huffman-coded literals and tokens (11-bit codes, decoded via the SIMD-merge PivCo layout) push the ratio past zstd -1 while still decoding several times faster than it. Choose it when storage or bandwidth dominates but decode must stay fast; compression is the slowest tier.

-T, –threads N
    Set the number of threads to use for compression and decompression. A value of 0 means auto-detection based on the number of available CPU cores.

-B, –block-size SIZE
    Set the compression block size. SIZE must be a power of two between 4K and 2M (e.g. 4K, 64K, 256K, 512K, 1M). Smaller blocks reduce memory usage and improve random-access decompression; larger blocks generally yield better compression ratios. The default is 512K, tuned for bulk/archival workloads where ratio and decompression throughput matter most. This option is only meaningful during compression; the block size is stored in the archive header and automatically used during decompression.

-C, –checksum
    Enable block hashing during compression using the rapidhash algorithm. Recommended for data integrity validation. Checksum verification is automatically performed during extraction when enabled.

-N, –no-checksum
    Explicitly disable checksum generation.

-D, –dict FILE
    Use a pre-trained dictionary (.zxd) for compression or decompression. On compression, the archive records the dictionary’s dict_id in its header. On decompression, -D is required for any archive that was compressed with a dictionary — there is no auto-lookup; without it, decompression fails with a dictionary-required error (see DICTIONARIES).

-o, –output FILE
    Write output to FILE. For compression/decompression this overrides the positional OUTPUT-FILE (single-file mode only); when omitted the output name is derived from the input. For –train it sets the dictionary path: if FILE is a directory (or ends with a path separator) the dictionary is saved inside it as dictionary_<dict_id>.zxd, otherwise FILE is used verbatim; when omitted the dictionary is written to dictionary_<dict_id>.zxd in the current directory.

-S, –seekable
    Append a seek table to the archive during compression. This transforms the file into a random-access format (Seekable Archive), allowing the decoder to instantly locate and decompress specific blocks in O(1) time without reading the entire file. Ideal for compressed filesystems, game assets, and log analysis.

-k, –keep
    Keep the input file after an in-place compression or decompression. By default the input is removed only when its output name is auto-derived (e.g. file → file.zxc). When the output is named explicitly — with -o or a positional OUTPUT-FILE — the input is always kept, so this flag is only needed for the in-place case.

-f, –force
    Force overwrite of the OUTPUT-FILE if it already exists.

-c, –stdout
    Force writing to standard output (stdout), even if it is the console.

-v, –verbose
    Enable verbose logging mode. Outputs more detailed information during operations.

-q, –quiet
    Enable quiet mode, suppressing all non-error output (such as progress bars or real-time statistics).

-j, –json
    Output results in JSON format. This is particularly useful for scripting, benchmarking, and the --list mode.

–progress MODE
    Control the progress display: auto (default) shows a progress bar on the standard error stream when it is a terminal and the file is larger than 1 MB; always forces progress reporting even when standard error is not a terminal (updates are then printed one per line, at most once per second) or when the size is unknown (stdin input); never disables it. -q suppresses progress regardless of this option.

  SPECIAL OPTIONS

-V, –version
    Display the version of the zxc library and the compiled architecture information, then exit.

-h, –help
    Display a help message and exit.

  DICTIONARIES
For workloads compressed in small blocks (4K–128K), a pre-trained dictionary can dramatically improve the compression ratio. The dictionary prefills the LZ77 window at the start of every block, so the benefit is per-block: the smaller the block, the more it relies on the dictionary for early matches.

Dictionaries are external .zxd files referenced from the archive header by a 32-bit dict_id (a hash of the dictionary content). The .zxd extension is cosmetic; a .zxd file is identified by its magic word, not its name.

When –train’s -o targets a directory (or is omitted, defaulting to the current directory), zxc names the file dictionary_<dict_id>.zxd (the dict_id is the lowercase 8-digit hex reported by zxc -l). On decompression the dictionary is not auto-located: an archive compressed with a dictionary must be decompressed by supplying that dictionary with -D, otherwise decompression fails with a dictionary-required error.

If no matching dictionary can be found (or supplied), decompression fails with a dictionary-required error rather than producing corrupt output.

  EXAMPLES
Compress a file: zxc data.txt

Compress a file with high density (Level 6, archival): zxc -6 data.bin

Compress a file with maximum density (Level 7, Ultra): zxc -7 data.bin

Decompress a file: zxc -d data.txt.zxc

Decompress a file using the unzxc alias: unzxc data.txt.zxc

Compress multiple files independently: zxc -m file1.txt file2.txt file3.txt

Compress all files in a directory recursively: zxc -r ./my_folder

Decompress all files in a directory recursively: zxc -d -r ./my_folder

Decompress a file to standard output: zxc -dc data.txt.zxc > data.txt

List archive information: zxc -l data.txt.zxc

Compress with a custom block size (64 KB): zxc -B 64K data.bin data.zxc

Compress with maximum block size (2 MB): zxc -6 -B 2M data.bin data.zxc

Run a benchmark for 10 seconds: zxc -b 10 data.txt

Train a dictionary into a directory (saved as dictionary_<dict_id>.zxd): zxc –train -o dicts/ samples/*.json

Compress with a dictionary using small blocks: zxc -B 4K -D dicts/dictionary_bc46eec1.zxd input.json

Decompress (the dictionary is required, pass it with -D): zxc -d -D dicts/dictionary_bc46eec1.zxd input.json.zxc

  BUGS
Report bugs at https://github.com/hellobertrand/zxc/issues .

  AUTHORS
Bertrand Lebonnois

  LICENSE
BSD 3-Clause License.